RF Modules

RIM511 RF Module

RF Module 40mm x 18mm x 13mm with SMA connector for Whip Antenna using Jennic JN5139

Parameter	Performance
Frequency band	2.4 – 2.4835 GHz
Number of channels	16
Data rate	250 Kbit/s
Max output power	18 dBm
Transmit output power	2 – 18 dBm
Sensitivity (PER 1%)	-103 dBm
Supply Voltage	3.2 – 3.6 Volt
Current Consumption, TX	155 mA
Current consumption, RX	45 mA
ROM	192 KB
RAM	96 KB
Deep sleep current	8 uA
Sleep current with active sleep timer	9.3 uA
Operating Temperature	-40 to +85 C

RIM512 RF Module

RF Module 40mm x 18mm x 2.5 mm with chip Antenna using Jennic 5139

Parameter	Performance
Frequency band	2.4 – 2.4835 GHz
Number of channels	16
Data rate	250 Kbit/s
Max output power	15 dBm
Transmit output power	0 – 15 dBm
Sensitivity (PER 1%)	-100 dBm
Supply Voltage	3.2 – 3.6 Volt
Current Consumption, TX	155 mA
Current consumption, RX	45 mA
ROM	192 KB
RAM	96 KB
Deep sleep current	8 uA
Sleep current with active sleep timer	9.3 uA
Operating Temperature	-40 to +85 C

RIM541 RF Module

RF Module 44mm x 17mm x 13mm with SMA connector for Whip Antenna using Nordic nRF24L01transceiver

Parameter	Performance
Frequency band	2.4 – 2.484 GHz
Number of channels	84
Data rate	1 and 2 Mbps air data rate
Max output power	17 dBm
Transmit output power	2 – 17 dBm
Sensitivity (0.1%BER ) at 2 Mbps	-85 dBm
Sensitivity (0.1%BER 1%) at 1 Mbps	-88 dBm
Supply Voltage	3.2 – 3.6 Volt
Current consumption at 2 Mbps air data rate, TX	130 mA
Current consumption at 2 Mbps air data rate, RX	22 mA
Operating Temperature	-40 to +85 C

RWM541 RF Module

RF Module 44mm x 17mm x 13mm with SMA connector for Whip Antenna using Nordic nRF24L01transceiver

Parameter	Performance
Frequency band	2.4 – 2.484 GHz
Number of channels	84
Data rate	1 and 2 Mbps air data rate
Max output power	20 dBm
Transmit output power	4 – 20 dBm
Sensitivity (0.1%BER ) at 2 Mbps	-85 dBm
Sensitivity (0.1%BER 1%) at 1 Mbps	-88 dBm
Supply Voltage	3.2 – 3.6 Volt
Current consumption at 2 Mbps air data rate, TX	170 mA
Current consumption at 2 Mbps air data rate, RX	22 mA
Operating Temperature	-40 to +85 C

Wireless Audio Streamer Application Note RAHT521 RAHR521

There are two modules supplied by RF Arrays for Wireless Audio streaming, (1) RAHT521 – Transmitter & (2) RAHR521 – Receiver. These modules should be operated using battery (4.5V min. & 12V max.). These modules are plug & play devices so it didn’t require any kind of configuration to either audio devices or modules.